EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Solar Demand Controller is often a highly efficient photo voltaic controller made for off-grid photo voltaic units. According to multiphase synchronous rectification technologies, it ensures optimized Electrical power conversion and procedure balance for an array of photovoltaic (PV) apps.

Crucial Options of the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Solar Cost Controller engineering for remarkable photo voltaic Vitality harvesting. Crucial functions incorporate:

Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Display with real-time knowledge checking.
Various Load Management Modes like manual and timer.
Thorough Digital Protections versus overcharging, more than-discharging, brief circuits, and reverse polarity.
Action-by-Action Guide to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Planning the Controller
Assure all parts are provided: Tracer AN unit, temperature sensor, interaction cables, and user guide.
Verify the model amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a effectively-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the provided mounting brackets.
Manage proper clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Caution: Normally adhere to correct safety protocols and make sure the technique is driven off before connecting factors.

Move 1: Hook up the battery terminals to the charge controller (good to positive, negative to detrimental).
Move 2: Hook up the photo voltaic panel array into the PV enter terminals.
Stage three: Connect the load terminals if utilizing a immediate load link.
Step 4: Double-Check out all connections for polarity and tightness.
four. Configuring the Controller Options
Electricity to the controller by connecting the battery very first.
Utilize the LCD Exhibit to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Manual, timer, mild Handle.
5. Checking and Details Logging
The Tracer AN Collection supports serious-time monitoring using the MT50 distant meter.
Details might be logged via the RS485 conversation port utilizing software package like Photo voltaic Station PC.
Distant checking can be done With all the EPEVER WiFi module.
six. Troubleshooting Prevalent Troubles
Challenge 1: No Electricity Output

Test battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: More than-Voltage Safety

Verify the photo voltaic array’s voltage rating.
Alter system parameters if necessary.
Concern three: No Battery Charging

Inspect PV More info wiring for continuity.
Verify MPPT options within the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:

Greater Effectiveness: Reduced Strength losses in the course of conversion.
Increased Reliability: Secure performance underneath variable loads.
For a longer time Battery Everyday living: Regular and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Extraordinary option for optimizing solar power generation and lengthening battery everyday living. By subsequent the above mentioned set up guidebook, people can ensure highest performance and system longevity.